Wincor Nixdorf TH200 Скачать руководство пользователя

Страница: 67 / 106

Programmer’s Guide

TH200

FS &

Select Kanji character mode

Code:

Description:

Notes:

Reference:

ASCII

Hex

Decimal 28

Selects Kanji character mode.

For Japanese model:



When the Kanji character mode is selected, the printer processes all Kanji code for

each two bytes.



Kanji codes are processed in the order of the first byte and second byte.



Kanji character mode is not selected when the power is turned on.



Using

FS C

, the Kanji character code system is selected.

For Simplified Chinese/Traditional Chinese/Korean model:



When the kanji character mode is selected, the printer checks whether the code is for

Kanji or not, then processed the first byte and the second byte if the code is for Kanji.



Kanji codes are processed in the order of the first byte and second byte.



Kanji character mode is selected when the power is turned on.



Kanji codes are processed in the order of the first byte and second byte.

FS .

FS C

–

Turn underline mode on/off for Kanji characters

Code:

Range:

Description:

Notes:

Default:

Reference:

ASCII

Hex

Decimal 28

≤

2, 48

≤

Turns underline mode for Kanji characters on or off, based on the following values of n.

Function

0, 48

Turns off underline mode for Kanji characters

1, 49

Turns on underline mode for Kanji characters (1-dot thick)

2, 50

Turns on underline mode for Kanji characters (2-dot thick)



The printer can underline all characters (including right- and left-side character

spacing), but cannot underline the space set by

and 90° clockwise-rotated

characters.



After the underline mode for Kanji characters is turned off by setting n to 0, underline

printing is no longer performed, but the previously specified underline thickness is not

changed. The default underline thickness is 1 dot.



The specified line thickness does not change even when the character size changes.



It is possible to turn underline mode on or off using

FS !

, and the last received command

is effective.

n = 0

FS !

Содержание TH200











































































































Результаты поиска

Содержание TH200

Отзывы:

Похожие инструкции для TH200

Бренды по названию

Популярные бренды

Wincor Nixdorf TH200, Руководство программиста

Результаты поиска

Содержание TH200

Отзывы:

Похожие инструкции для TH200

Бренды по названию

Популярные бренды