Wincor Nixdorf TH200, Руководство программиста

Страница: 16 / 106

Programmer’s Guide
TH200
16
ESC ! n Select print mode(s)
Code:
Range:
Description:
Notes:
Default:
Reference:
ASCII ESC ! n
Hex 1B 21 n
Decimal 27 33 n
0
≤
n
≤
255
Selects print mode(s) using n as follows:
Bit Off/On Hex Decimal Function
Off 00 0 Character font A (12 × 24) 0
On 01 1 Character font B (9 × 17)
1,2 Undefined.
Off 00 0 Emphasized mode not selected 3
On 08 8 Emphasized mode selected
Off 00 0 Double-height mode not selected 4
On 10 16 Double-height mode selected
Off 00 0 Double-width mode not selected 5
On 20 32 Double-width mode selected
6 Undefined
Off 00 0 Underline mode not selected 7
On 80 128 Underline mode selected

When both double-height and double-width modes are selected, quadruple size

Characters are printed.

The printer can underline all characters, but can not underline the space set by HT or
90° clockwise rotated characters.

The thickness of the underline is that selected by ESC -, regardless of the character
size.

When some characters in a line are double or more in height, all the characters on the
line are aligned at the baseline.

ESC E can also turn on or off emphasized mode. However, the setting of the last
received command is effective.

ESC - can also turn on or off underline mode. However, the setting of the last received
command is effective.

GS ! can also select character size. However, the setting of the last received command
is effective.
n = 0
ESC -, ESC E , GS !