Wincor Nixdorf CINEO C1030 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 35

Wincor Nixdorf CINEO C1030 Скачать руководство пользователя страница 5

Spare Parts

1

Introduction

With the CINEO C1030 Wincor Nixdorf offers an entry-level model for coin processing in cash

offices. This system processes up to 8 coin denominations and recycles them. Thus, coins are

available again for dispensing. Capacity per denomination averages 1,200 coins (based on

the 1 € coin).
The CINEO C1030 is suitable for use in midsize store formats such as supermarkets,

discounters or specialty stores.

About this manual

This manual refers to technically trained personnel only.
It provides all necessary information for installing the CINEO C1030 at site.

Notes are marked by this symbol.

Caution! Identifies action requiring caution.

The responsibility for all technical and special prerequisites for the installation of the

CINEO C1030 is borne by the customer. A detailed list of customer responsibilities

is given in this manual.
Installation as well as connection of CINEO C1030 may only be executed by technically

trained personnel.
Strictley follow the safety instructions given in this document when handling the

CINEO C1030. Find further safety, installation, and maintenance instructions in the manuals

supplied with the components.
In case of doubts or questions please contact Wincor Nixdorf International (WN).

Spare Parts

All information on the service-related spare parts and field replaceable units as well as

order numbers and prices can be found in the Wincor Nixdorf Partnernet for qualified

service partners (http://partnernet.wincor-nixdorf.com) under the menu option:
Products



Services



Spare parts



Spare part info tool "WNSpare_V4.4".

Orders can be made in the "Wincor Nixdorf Spare Part Portal":

https://logistics.wincor-nixdorf.com/index.html

«
...
3
4
5
6
7
...
»

Содержание CINEO C1030




































Отзывы:

Нет отзывов