Wincor Nixdorf CINEO C1030, Руководство по установке, Страница: 31 / 35

Appendix
27
Further Documentation
You will find the „User Manual“ (Hardware) on the Internet:
http://www.wincor-
nixdorf.com/internet/site_EN/sid_022E1EB999DBEBDE7BDDA2BF7738233B/EN/Support/Do
wnloads/POSLotterySystems/Manuals/RCCM/RCCM_node.html
Cleaning Instructions

Always turn off the system before cleaning.

The glass surface of your Touch Screen should be cleaned with a mild, abrasive-free,
commercially available glass cleaning product.

All pH neutral materials (pH 6 to 8) are good for cleaning. Cleaners with pH values 9
to 10 are not recommended. Cleaning with water and isopropyl alcohol is possible as
well.

Do not use solvents containing acetic acid.

Use a soft, fine-meshed cloth to clean the surface. Dampen the cloth slightly and
then clean the screen.
Wrong maintenance may cause damages to the screen, which are not covered by warranty.
Maintenance and Service
When carrying out work on the components and modules that carry an electrical charge,
this equipment must first be disconnected from the power supply. Besides switching off
the power switch on the power distributor, the safety plug must be disconnected from
the power distributor.
System’s Housing
Clean the housing of the CINEO C1030 with a vacuum cleaner or cloth. Eliminate damage to
paint, if necessary and possible.