Wincor Nixdorf BEETLE/S, Руководство пользователя

Страница: 6 / 43

Important notes
The modular POS system BEETLE /S conforms to the current safety
standards for data processing equipment.
This device contains a laser of the class 1.
n
If this device is taken from a cold environment into the operating room,
moisture condensation may form. The device must be absolutely dry
before being put into service; an acclimatization period of at least two
hours must therefore be observed.
n
This device is equipped with a safety-tested power cable and may be
connected only to a prescribed grounded-contact power socket.
n
When setting up the device, ensure that the power socket on the device
and the grounded-contact power socket are easily accessible.
n
To disconnect the device from the supply voltage completely, switch off
the device and disconnect the power plug.
n
Ensure that no foreign objects (e.g. office clips) find their way into the
device, as this may lead to electric shocks or short-circuits.
n
Never plug in or unplug data communication lines during
thunderstorms.
n
Protect devices from vibrations, dust, moisture and heat.
n
Always dispose of used parts, such as batteries, in an environmentally
safe manner.
n
The lithium battery must be disposed of in accordance with local
regulations for special waste.
n
In emergencies (e.g. damaged housing or damaged power cable,
penetration by liquids or foreign bodies), the device must be switched
off immediately, the power plug disconnected and the Customer
Service of Wincor Nixdorf or your dealer must be notified.
The device may only be repaired by authorized qualified personnel.
Unauthorized opening of the device and inexpertly carried-out repairs may
not only seriously jeopardize the safety of the user, but also cancel all
warranty and liability agreements.
Your BEETLE POS system is the result of modern technical innovation. So
please see for according structural and technical surroundings to guarantee
a faultless and efficient work of your BEETLE.
Therefore, you should connect your BEETLE or other IT-devices only to
power supply systems with separately guided protective earth conductor
(PE). This kind of electricity system is known as TN-S network. Do not use
PEN conductors!
IMPORTANT NOTES
2