Wincor Nixdorf BEETLE/S, Руководство пользователя

Страница: 22 / 43

TFT - LCD display
If a TFT adapter is installed you can connect a SNIkeyTFT, BA71, BA72,
BA73 to the BEETLE /S without using an extension board ISA slot. Connect
the 50-pin data cable of the LCD to the system. The signals for the touch
screen function and the power supply is also made via this cable. To
implement the touch screen functionality for the COM2 interface you have to
change some system settings (see manual BEETLE POS motherboard).
If the display is equipped with a keyboard cable connect this with the KYBD
terminal. You can only connect one keyboard cable to the BEETLE /S at
one time - either that of the LCD or that of the free standing keyboard (e.g.
PC keyboard, TA57, TA61)
To find out how to connect a second keyboard, refer to the user guide of the
display.
Connecting standard PC peripherals (COM1)
You can connect supplementary standard peripherals to the
BEETLE /S via the COM1 serial interface.
Make sure that all supplementary devices have been tested for RFI
suppression pursuant to the legal requirements of your country.
Network
If a network board is installed, the system can be connected to a network
(LAN) from the POS terminal back panel. If a LAN board is not installed, this
location on the back panel is closed by a dummy cover (see also chapter
Configuration variants).
CONNECTING PERIPHERALS
18