Wincor Nixdorf BEETLE/S, Руководство пользователя

Страница: 19 / 43

Light emitting diode (LED)
You will find the LEDs at the front side of the BEETLE next to the ON/OFF
button.
The left LED (green) lights when the
BEETLE /S is switched on.
The right LED (yellow) lights up while the hard
disk is being accessed.
Connecting peripherals
The peripherals mentioned here are available as options and are not part of
the basic configuration. A separate manual is provided for each of the
connectable components. For more detailed information, please consult the
relevant documentation.
The figure shows the back panel of the BEETLE /S with the locations of the
connecting sockets and connecting plugs. If you wish to connect a monitor,
however, you must also have a video board. You can connect the system to
a network via an onboard expansion board.
CRT and TFT interfaces are used alternatively for a monitor or a LCD
display.
Connecting peripherals with the system switched on is not allowed, except
USB connector.
15
CONNECTING PERIPHERALS
DC24V
KYBD
COM4* COM3* COM2* COM1 USB LAN
CRT/TFT
1
1 0
2
LPT1
100-120 V / 2 A max
200-240 V / 1 A max
CASHDR ONLY
SPK
MIC
COM7
COM8
OPTIONAL