WINCODE LP423N, Руководство пользователя

Страница: 67 / 68

LP4 USER MANUAL
- 66 -
7. Maintenance
The following are some steps and methods to suggest user for proceeding the simple
maintenance of the printer.
1. Turn off the power firstly, and then open the top cover of printer.
2. Take out the ribbon then find the print head. (If the print job has just finished,
please wait until it is completely cool.)
3. If the print head is adhibited with label paper or dirt, please use a head cleaning
pen or a cotton swab with 100% ethanol to clean the surface of the print head.
Repeat the procedure until it is all cleaned.
4. Keep the regular rubber roller cleaning to maintain the printing quality and avoid
the print head damage.
5. Use compressed air or vacuum to clean the dirt from the sensor.
Note:
1.) it is suggested to clean the printhead once a week and to clean the sensor once a
month.
2.) When using a cotton swab to clean the print head, please make sure that there
are no metal fragments or hard particles attached on the cotton swab as that would
cause the damage of the print head.