Page 7 of 49
Document No.: 006020
Revision: P
OWNERS OPERATING & MAINTENANCE MANUAL
PHLEBOTOMY COLLECTION
GENERAL CARE & CLEANING
•
Periodically inspect tightness of all screws, bolts, nuts, or other fasteners.
Winco Mfg., LLC’s full-line of products are built to provide durability and reliability when properly cared
for. In general all of our products should be:
1. Cleaned
2. Disinfected (per facility policy)
3. Rinsed
4. Allowed to air dry
It is important to note that disinfecting a product is not the same as cleaning the product. Disinfectants
alone will not provide adequate cleaning, they do not have grease or oil cutting properties to remove
grime or hair and skin oils. Over time, the appearance and feel and performance of your upholstery may
diminish if not cleaned properly.
Remove grime, hair and body oils; Your furnishings should be cleaned with mild soap & water solution
and a damp cloth on a regular basis (especially where skin & hair make contact with upholstery). Avoid
harsh detergents or chemicals that could damage the upholstery or finish of your chair. If the furnishing’s
upholstery is disinfected with chemicals or bleach mixtures, the chair
MUST
be wiped off using only
clean water on a damp cloth and then be allowed to air dry. Failure to rinse upholstery with clean water
can result in a build-up of residues over time that can dry out the upholstery and cause changes to the
look and feel of the upholstery and eventually can lead to cracking.
Please refer to any instruction labels or tags that may have been included with your product for
complete care and cleaning instructions. Retain information on the label or tag for future use.
Additional information for cleaning products with Winco’s selection of vinyls can be found on our
suppliers website at: https://spradlingvinyl.com/resource-library.
For Custom Vinyl, please refer to the manufacturer’s instructions.
CLEANING
