28 Washbasin fitting
WimTec ECOLINE
EN
ECOLINE
Configuring the functions
Enable the continuous flow function to fill the washbasin or a container.
Continuous flow:
Program 2 and 4
Enable continuous flow if (in
program 4)
Approach the infrared
sensor with your hand. The
sensor LED starts flashing.
After flashing five times, the
cleaning stop is enabled. You
can enable the continuous
flow function by approaching
the sensor three times again
within 10 s.
Disable continuous flow
The function automatically
ends after the set water
arrest time has elapsed.
To instantly end continuous
flow, perform the same steps
as used for ‘Enable
continuous flow’.
Enable continuous flow
Approach the infrared sensor
with your hand. The sensor
LED starts flashing. After
flashing three times, conti-
nuous flow is enabled for the
water arrest time configured.
3 x
um 07:00 Uhr
