INSTRUCTION MANUAL
MOBILE DEVICE CHARGER LO32
WIMERTON PRUSZYŃSCY SPÓŁKA JAWNA
Tax Identification No (NIP) 8442358122
16-
400 Suwałki, ul.
Klonowa 40/73
National Court Register No (KRS) 0000640676
A
1.1
Introduction
The following instruction manual constitutes an integral part
of the device. Complete instruction manual should be kept within
the
User's reach throughout the period of device’s operation.
Information which is significant from the
User’s
point of view is marked using this symbol:
1.2
Intended application
The charger should be used indoors exclusively.
The product is to be used for connecting and charging up to
32 devices (such as tablets or smartphones) via an integrated USB
(Universal Serial Bus) type A connector representing BC1.2 5V DC
standard. What is more, the system can be optionally equipped with
an external F standard socket (Schuko®) for the purpose if charging
a laptop (230 VAC). Do not use the device for purposes other than
the ones indicated in this instruction manual.
The device should be kept out of the reach of children.
1.3 General recommendations concerning the safety
One should comply with all of the following recommendations
to ensure safety:
−
Read the operating instruction manual before commencing
the usage.
−
Do not immerse the charger, cable or plug in water or other
liquids.
−
Do not use the device if the power cord or plug is damaged.
−
Do not use the device if it has been damaged.
−
Do not place the power cord on sharp edges or blades.
−
Protect the power cord from heat and oils.
−
Do not place the charger in places which get hot easily or in
direct sunlight.
−
Do not cover the front or rear part of the charger, keep
a minimum of 5 cm empty space from each side.
−
Do not remove the plug from the socket with wet hands.
−
In case of damage concerning the device, it has to be repaired
by the Manufacturer.
−
The User is not allowed to repair the device on its own.
−
Do not introduce changes concerning the charger.
Redeveloping or modifying the product is forbidden. If the
product is used for an unintended purpose or if it is
connected in a manner not observing the conditions indicated
in this instruction manual, the product can end up being damaged.
Improper use can cause a danger situation (e.g. short circuit,
fire, electric shock, etc.). In such a case the Manufacturer shall
not bear responsibility.
Before commencing the device, check whether the installation
to be used for connecting the charger meets all of the
criteria indicated below:
-
The power supply installation is equipped with overcurrent
protection ≥ C 6A.
-
The power supply installation is equipped with a residual current
circuit breaker intended for alternating currents and pulsating
type A currents.
-
The power supply installation is equipped with a socket equipped
with a protective PE contact.
2.1 Description of the packaging contents
This set includes:
−
LO32 charger;
−
3m long power cord equipped with a UNI-SCHUKO plug, PE contact
and V-LOCK fastening;
−
2 pieces of spare quick fuses 3.15A, size 5x20mm;
−
2 pieces of M5x8 DIN 912 screws with DIN 6798 ø5,3 pads;
−
2 pieces of 150mm long braid for earthing the cabinet or lift
door;
−
4 M4x12 DIN 7500 screws for mounting Schuko® socket;
−
Instruction manual;
−
General Guarantee Conditions, Privacy Policy, Complaint Form
The packaging of the device is made of materials having
no negative impact on the environment. The aforementioned
materials are recyclable. The packaging materials should be
disposed of at appropriate collection centres.
The package contains small elements. Consequently, the risk
of suffocation or choking exists. Do not leave the packaging
unattended and keep it away from children.
2.2 Description of the identification plate
The identification plate contains technical data, serial number
and indication of the model. Removing the identification plate
is forbidden.
2.3 Disposal
The device must be disposed of separately from other waste
following the Directive 2012/19/EC after completing its
lifetime.
The device does not contain substances which are hazardous
to health and the environment in accordance with the requirements
of applicable European directives.
Disposing of used electrical appliances together with
household waste is not allowed. Return used electric
appliances to the centre for the selective collection
of electrical waste so that it could be disposed of following
the applicable
regulations.
Such
a
procedure
prevents
contamination of the environment and enables recycling materials
left from the old equipment.
2.4 Manufacturer's liability
The Manufacturer is not liable for personal or material damage
resulting from:
−
using the device in a manner inconsistent with the intended use
of this device,
−
the User not reading and observing the instruction manual,
−
tampering even with one part of the device,
−
using unoriginal spare parts,
−
not observing warnings regarding the safety.
Detailed guarantee conditions can be found in Wimerton General
Guarantee Conditions.
3.1 Description of the device
1.
Power module equipped with an illuminated switch, C13 socket
with V-LOCK system and fuses.
2.
Main housing equipped with 32 USB sockets with control
diodes.
3.
Double socket for safety fuses.
4.
2x safety fuses; dimension: 5x20mm, current: 3.15A, type:
fast.
5.
Cooling fan grid,
DO NOT COVER THIS PART!
6.
Detachable plugs intended for socket for laptop charging.
7.
Schuko socket, maximum current 0.5A, 230VAC.
8.
Cable grommet for mounting in the bulkhead wall of the
trolley or cebinet.
WARNINGS
USAGE
DESCRIPTION OF THE DEVICE
EN
DETAIL A
DETAIL B
DETAIL C
A
C
B
DETAIL B
