IMPORTANT SAFEGUARDS –
Read before using your Chocolate Pro™ Chocolate Fountain.
FOR HOUSEHOLD USE ONLY!
When using electrical appliances, basic safety precautions should always be followed
including the following:
1.
Read all instructions prior to use.
2.
Do not touch hot surfaces.
3.
To protect against electrical shock do not immerse cord, plugs, or bottom unit in
water or any other liquid.
4.
Close supervision is necessary when any appliance is used by or near children.
5.
Unplug from outlet when not in use and before cleaning. Allow to cool thoroughly
before cleaning and storing.
6.
Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions or has been damaged in any manner. Return the appliance to the
manufacturer for examination, repair or adjustment.
7.
Avoid contact with moving parts.
8.
If any solid item drops into fountain during operation, turn unit “Off” and unplug
before removing the item.
9.
This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock, this plug is intended to fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
10.
Item is designed for use with 120V A.C. electrical outlet only.
11.
Do not use appliance with any accessory attachments not recommended by the
manufacturer as injuries may occur.
12.
Do not use outdoors. Item intended for use indoors only.
13.
Do not let cord hang over edge of table or counter, or touch hot surfaces.
14.
Do not place on or near a hot gas or electric burner, or in a heated oven.
15.
Extreme caution must be used when moving an appliance containing hot liquid.
16.
Before removing plug from wall outlet, turn switch to “Off” position.
17.
Do not use appliance for other than its intended use.
18.
Do not operate unless Chocolate Pro™ Chocolate Fountain is fully assembled. Be
sure that the center tube pieces are securely locked in place and that the screw
auger is secure.
19.
WARNING:
This is not a fondue pot! Do not melt or try to heat any fluid directly in
the fountain. Care should be taken to fully melt all chocolate or confectionery
coating before placing in the fountain as unmelted pieces could cause the unit to jam.
20.
SAVE THESE INSTRUCTIONS.
IMPORTANT INFORMATION:
A short power-supply cord is provided to reduce the hazards resulting from entanglement
or tripping over a longer cord. You may use an extension cord with care; however, the
marked electrical rating of the extension cord must be at least as great as the electrical
rating of the fountain. The extension cord should not be allowed to drape over the counter
or table where it can be pulled on by children or tripped over. Do not allow extension cord
to hang over the edge of the counter or table where it may be grabbed by small children
or become entangled with the user or passers-by.
Instructions for Use:
1.
Thoroughly wash and dry the center tube pieces and screw auger before first use.
NEVER IMMERSE ELECTRICAL UNIT IN WATER. Wipe metal basin with a damp cloth
to clean.
2.
Completely assemble the fountain following the illustrations
below. Place on level surface such as a counter or table. Be
sure you are near an outlet and away from any water source.
3.
Before operating, use the bubble level at the back of the base
unit to ensure that the fountain is completely level. Use the
three adjustable feet to achieve the correct leveling. Turn feet
clockwise to raise and counter-clockwise to lower. Fountain
must be completely level to function properly!
4.
Plug the chocolate fountain into a 120V outlet and move
switch to the “Preheat” position. For best results, allow
appliance to preheat for approximately 10 minutes. Do not
operate in this mode for serving.
5.
While base unit is preheating, carefully melt 4 pounds of
chocolate in microwave or double-boiler. Be sure that chocolate
is completely melted and add the indicated amount of vegetable
oil as the chocolate is being melted (see chart) based on the
type of chocolate being used. Stir well. Ideal operation requires
4 pounds of chocolate.
6.
After fountain is preheated, pour the melted chocolate into the
metal bowl and turn the knob to “Flow.”
7.
Add additional melted chocolate as needed, following the
instructions for preparation of the chocolate.
8.
Never leave the appliance unattended while it is on.
Attach top cap
to center tube and
center tube to bottom
tube by sliding and
locking grooves
as shown.
Top Cap
Center
Tube
Bottom
Tube
Auger
Base Unit
C
M
Y
CM
MY
CY
CMY
K
chocfountain2.pdf 8/15/07 3:42:07 PM
