Never drill in horizontal angle. This drill should only be operated with the auger at a 90° angle to
the ground
(see figure 7a, all figures are attached to this manual).
Always keep handles dry and clean.
Before starting to drill make sure the bit is not obstructed.
Always work in a firm-footed and safe position.
Never touch the auger bit or carry out maintenance with the engine running.
Grip the post hole digger firmly with both hands and keep all parts of the routine maintenance. For
other repairs, the tool must be serviced by an authorized person.
Store the power drill off the ground in a vertical position in a dry place and with fuel tank empty.
If the auger bit jams, stop the engine immediately.
Symbols
IMPORTANT:
Some of the following symbols may be used on your tool. Please study them and learn
their meaning. Proper interpretation of these symbols will allow you to operate the tool better and
safer.
SYMBOL NAME
EXPLANATION
Safety symbol
Indicates danger, warning or caution. It means attention!!! Your safety is
involved.
Read your operators manual
Your manual contains special message to bring attention to potential
safety concerns as well as operating and serving information. Please
read all information carefully to ensure safe use.
Eye and hearing protection
Wear eye and hearing protection when operating this equipment.
Keep bystanders away
Keep all bystanders at least 3 m away.
Boots
Wear non-slip safety footwear when using this equipment.
Gloves
Wear non-slip, heavy-duty gloves.
No smoking
Do not smoke when mixing fuel or filling fuel tank.
Petrol
Use unleaded petrol intended for motor vehicle use with an octane rating
of 90 ([R+M]/2) or higher
Oil
Use synthetic 2-stroke oil for air cooled engines.
Mix petrol and oil
Mix the fuel mix thoroughly and also each time before refueling.
Switch
On/Off Switch
I=ON to run
O=OFF to stop
© by WilTec Wildanger Technik GmbH
Seite 29
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
