IDLE SPEED REPLACEMENT
See figure 12a-12p
If the auger attachment turns at idle, the idle speed screw on the engine needs adjusting. Turn the idle
speed screw counter clockwise to reduce the idle RPM and stop the auger attachment movement. If
the auger attachment still moves at idle speed, contact a service point for adjustment and discontinue
use until the repair is made.
Clean all foreign material from the product. Store the idle unit indoors in a dry, well ventilated area
that is inaccessible to children. Keep away from corrosive agents such as garden chemicals.
Abide by all ISO and local regulations for the safe storage and handling of petrol.
WHEN STORING FOR 1 MONTH OR LONGER
Drain all fuel from the tank into a container approved for petrol. Run the engine until it stops.
© by WilTec Wildanger Technik GmbH
Seite 39
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
