Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in-
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Description
The hydraulic gearbox jack with a load capacity of 500 kg and a max. lifting height of 192 cm (176 cm)
is ideal for assembly work on gearboxes or undercarriages. It can also be used when replacing bear-
ings under a lifting platform. The gearbox jack can be conveniently rolled under the vehicle and is
pumped to the required height by the easy-to-operate foot pedal. The gearbox jack is lowered by turn-
ing the lateral handwheel which is steplessly variable.
Item
number
Max. load ca-
pacity
(kg)
Min. height
(mm)
Max. height
(mm)
Piston dia-
meter
(mm)
Wheel dia-
meter
(mm)
62420
500
1100
1920
28
75
62421
500
855
1760
inner piston:
32, outer: 43
75
Safety precautions/warnings
The owner and/or user must have read and understood the operating instructions of the device before
using it. Persons using the device should be cautious, competent, trained, and qualified in the safe
handling of the working equipment used when working on engines and their components. Warnings
should be read and understood.
Familiarise yourself with the application control, the application process, and the warnings.
The gearbox jack may only be used for removing and installing gearboxes (gear changings,
differential gears, etc.).
Make sure that all connection brackets are tight and secure.
Make sure that you are familiar with the contents of the instructions for use.
This device is not intended to be used by persons (or even children) with reduced physical,
sensory or mental abilities or persons without the appropriate experience or knowledge, un-
less they have previously been instructed to use the equipment by a person responsible for
their safety and are supervised.
Children must be supervised to ensure that they do not play with the device.
Make sure that the load is free and no obstacles make its lifting difficult.
The load must be centred on the carrier.
The gearbox jack may only be pushed slowly over level ground with load when fully lowered.
Make sure that the load cannot slide down or glide off.
Check the loading balance after a few centimetres before going on.
Avoid that the charge swings.
Ensure that no one is near the charge.
Warn the persons present before lifting the charge.
Report to your supervisor or workshop as soon as something unforeseen happens.
© by WilTec Wildanger Technik GmbH
Item 62420, 62421
Page 3
http://www.WilTec.de
http://www.aoyue.eu
03 2021
-1
