X100G-
Flash Tag User’s Manual
Page 1 of 3
1 Installation
The Wilson X100G-Flash Tag is mounted at the center of mass of the object to be sensed.
The sensor is capable of detecting motion in the following axes:
The Wilson X100G-Flash Tag module must be placed in an enclosure of non-conductive
material.
2 Labeling Requirements
The Wilson X100G-Flash Tag will not be visible or accessible in the host product. The host must
be labeled with the following information:
Contains FCC ID: 2AHBQX21FC38 and IC: 21110-X21FC38
Or
Contains FCC ID: 2AHBQX21FC38
IC: 21110-X21FC38
The label must be permanently affixed to the host and readily visible.
𝑎
𝑥
𝑎
𝑦
𝑎
𝑧
𝜔
𝑥
