background image

en

Installation and operating instructions • Wilo-Isar BOOST5 • Ed.03/12/2022

9

WARNING

Non-observance may result in (very) severe injury.

CAUTION

The product risks becoming damaged. “Caution” is used when there is a
risk to the product if the user does not observe procedures.

NOTICE

Note containing useful information for the user about the product. It as-
sists the user in the case of an issue.

2.2

Personnel qualifications

The installation, application and maintenance personnel must
have the appropriate qualifications to complete this work. The
operator must ensure the personnel’s areas of responsibility,
terms of reference and their supervision. If the personnel are not
in possession of the necessary knowledge, they are to be trained
and instructed. If necessary, this training can be carried out by the
product’s manufacturer on the operator’s behalf.

2.3

Danger in the event of
non-observance of the
safety instructions

Non-observance of the safety instructions may constitute a
danger to persons, the environment and the product/unit. Non-
observance of the safety instructions also results in the loss of
any claims to damages. More specifically, non-observance can re-
sult in the following risks:

danger to persons from electrical, mechanical and bacteriolo-
gical influences,

damage to the environment due to leakage of hazardous ma-
terials,

damage to property,

failure of important product/unit functions,

failure of required maintenance and repair processes.

2.4

Safety consciousness on
the job

The existing directives for accident prevention must be adhered
to. Danger from electrical current must be eliminated. Local dir-
ectives or general directives [e.g. IEC, VDE etc.] and instructions
from local energy supply companies must be respected.

2.5

Safety instructions for
the operator

This device is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or a lack of
experience or knowledge, unless they are monitored or have been
given detailed instructions concerning use of the device by a per-
son responsible for their safety.

Children must be supervised to ensure that they do not play with
the device.

Содержание Isar BOOST5

























Отзывы: