Wilo Helix2.0-VE Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 92

background image

en

10

Installation and operating instructions • Drive for Wilo-Helix2.0-VE / Wilo-Medana CH3-LE • Ed.01/2022-06

Installation outside a building (outdoor installation)

•

Observe permissible environmental conditions and protection class.

•

Install the drive in a housing as weather protection. Observe permissible ambient tem-
peratures (see "Technical data" table).

•

Protect the drive against the effects of weather, for example, direct sunlight, rain and
snow.

•

Protect the drive so that the condensate drain openings remain free of dirt.

•

Take suitable measures to prevent the formation of condensation water.

Intended use includes compliance with these instructions as well as the information and
markings on the drive.

Any use beyond the intended use is considered misuse and will void any warranty claims.

4.2

Misuse

The operational reliability of the supplied product is only guaranteed for intended use in ac-
cordance with chapter "Intended use" of the installation and operating instructions. The
limit values must not fall below or exceed those values specified in the catalogue/data
sheet.

CAUTION

Misuse of the drive can lead to dangerous situations and dam-
age!

Drive without an Ex rating are not suitable for use in potentially explosive
atmospheres.

.

Highly flammable materials/fluids should always be kept at a safe dis-

tance from the device.

.

Never allow unauthorised work.

.

Never carry out unauthorised conversions.

.

Use authorised accessories and genuine spare parts only.

5

Description of the drive

5.1

Product description

The drive is composed of frequency inverter and "Electronic Commutated Motor" (ECM) to
be integrated on vertical and horizontal multistage pump.

Fig. 1 show an exploded view drawing of the drive with the main components. The drive
structure is explained in detail below.

Arrangement of the main components according to Fig.1, Fig. 2 and Fig. 3 of the table "Ar-
rangement of the main components":

Fig. 1: Main compontents

«
...
8
9
10
11
12
...
»

Содержание Helix2.0-VE





























































































Отзывы:

Нет отзывов

Похожие инструкции для Helix2.0-VE

Бренд: X-POWER Страницы: 44

Бренд: Waterous Страницы: 10

Бренд: Zenit Страницы: 136

Бренд: Little Giant Страницы: 8

Бренд: Homa Страницы: 11

Бренд: O'Clair Страницы: 138

Бренд: Speck pumpen Страницы: 8

Бренд: Tallas Pumps Страницы: 21

Бренд: Enapter Страницы: 2

Бренд: Danfoss Страницы: 44

Бренд: Pfeiffer Vacuum Страницы: 30

Warren Rupp MARATHON M20

Бренд: Idex Страницы: 36

AERCO AquaSolve AM8408-COM

Бренд: Watts Страницы: 8

Бренд: Hamron Страницы: 23

DHP-C Opti 400V 3N

Бренд: Danfoss Страницы: 32

flexoTHERM exclusive

Бренд: Vaillant Страницы: 80

Бренд: YAMADA Страницы: 20

Bell & Gossett NRF-25

Бренд: Xylem Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды