Wilo Geniax Central Control, Руководство пользователя, Страница: 82 / 118

English Extended operation: setting up the Central Control
80 WILO SE 04/2011
10. Use [

] and [

] to enter the end time.
11. Apply your input with [ OK ].
12. In order to set the room target temperature, select
»
Temp.
« and use [ OK ] to open the input menu.
13. Use [

] and [

] to enter the room target temperature.
14. Apply your input with [ OK ].
Set underfloor heating?
15. In order to set the temperature of the underfloor heating,
select »
Floor tempering
« and use [ OK ] to open the input
menu.
16. Use [

] and [

] to enter the tempering stage.
17. Apply your input with [ OK ].
This function is only available for those heating
installations equipped with underfloor heating.