User manual Wilo-Geniax Central Control
19
How does the temperature control work?
English
4
How does the temperature control work?
4.1 Principle of operation
Fundamentals
With the help of the Wilo-Geniax Central Control, you can
adjust the room temperature of an individual room or a
group of rooms to suit your personal needs. In contrast to
conventional thermostat regulators, with the Geniax
Central Control you can not only select a fixed temper-
ature, but also several
time areas
per day during which the
heating can be different. The heating sequence defined in
this way will be saved in
time profiles
. A distinction is
made between room time profiles and central time pro-
files for the Central Control. See section
.
The active time profile is shown in the display as room
mode.
Week profile
The
week profile
is the standard time profile. It is always
active as soon as another time profile is completed. You
can create up to three time areas for every day of the week
here. Besides these time areas (e.g., at night or for
absence) a lower room temperature is maintained to save
energy
[7.2 Editing the week profile, page 78]
. The basic
idea is it that you are normally only at home at certain
times, so rooms can be switched to energy saving heating
during times of absence or at night. These periods are
designated as
intermediate periods
. Time and intermedi-
ate periods always include a start and an end time as well
as a selectable room target temperature.
During installation, the week profile is individually
adapted to your heating habits and the spatial sit-
uation. You only have to change the week profile if
your heating habits have changed significantly. For
brief changes, you can manually change the tem-
perature or activate one of the time profiles
explained below.
