background image

OPERATING MANUAL FOR MOBILE HEATED CABINETS

IMPORTANT INFORMATION (PLEASE RETAIN THIS DOCUMENT)

This Manual covers the installation, operation and routine maintenance requirements for the 

following Williams Refrigeration products:

MHC10 

MHC16

Please read this Manual carefully before connecting the appliance.
Provided the instructions in this Operating Manual are read and implemented correctly, the 

optimum performance and reliability of your equipment should be maintained.
We assume the installer, user and service provider are appropriately trained, skilled and 

competent to properly and safely carry out the work, and will use the necessary safety 

equipment, and take the necessary precautions required of their intended work.

Williams cabinets/counters are available in a choice of temperature ranges and specific ambient 

ratings.

The Williams Mobile head Cabinet range temperature parameters are set as follows:

MHC

+78°C(173°F) / +82°C (180°F)

General Regulations 

Declaration of Conformity:

Williams Refrigeration declares that all products manufactured by Williams Refrigeration  

comply with the above directives as they apply to those products, and those products are  

therefore declared to be in conformity with the provisions of the above legislation.

Model No.: ...............................................................................
Serial No.: ................................................................................  

WWW.WILLIAMS-REFRIGERATION.COM

Содержание MHC10













Отзывы: