15
WaveCAST EIGHT
Some settings appear as you navigate the menu, and may not be visible when the
menu is not being navigated.
For example, channel 1's VU meter is highlighted. Selecting this via the left or right
arrow buttons will display the gain for channel 1.
When a channel's audio is overloaded, a exclamation point will appear over that channels VU meter. Adjust the audio
for that channel to fix the issue. If no network connection is available, the VU meters may not function, even when
audio is playing.
Selecting the IP Address and pressing the up or down arrows will toggle between
displaying the IP Address and displaying the MAC Address.
Restoring Defaults
Restore Factory Defaults is a hidden option underneath the device name. Selecting
this option will reset the device to its factory settings, including network and login
settings for the Web Control Interface. Two confirmation prompts will appear before
the settings are reset, including one to press down to confirm the restoration.
Locking the Front Panel
To lock or unlock the front panel, hold both the left and right arrows for a few
seconds while on the main menu. A pop up will let you know the device is locked.
While locked, a pop up message that the device is locked will appear.
Channel Menu
On the main menu, highlight a channels VU meter and press and hold the right
arrow to view additional information. Some channel settings can be edited. Use the
up and down arrows to disable or enable the channel, or adjust the input source.
The preset is visible on this screen, but can only be adjusted from the web interface.
The
multicast address
is visible on this screen, and will display if it is the default address or a user customized address. The multicast
address can only be adjusted from the web interface.
Navigate to the bottom of the screen to exit the channel information.
When a channel is disabled, it will show up in a darker grey on the main menu. In this picture, channel 1 is disabled.
