Page 4 /4
4. Position the Hanging Bracket (D) against the wall and make sure that the holes are aligned with the
installed ITW Toggles (C). Insert the Toggle Screws (B) using the Philips Head Screw Driver through
the holes of the Hanging Bracket (D) by rotating clockwise to tighten. Continue until the 4 installed
ITW Toggles are filled. Be patient, this will require several turns. Once screws are tight then Hang ing
Bracket (D) installation is complete.
5. Hang the Mirror Frame (A) by aligning the metal plate found at the back to the installed Hanging Bracket
(D) on the wall either vertically or horizontally.
6. Assembly is complete
Customer Service 877.812.6235www.williams-sonoma.com
A
D
B
E
