Truman Bar Cart
Assembly Instructions
Pre-Assembly
1. Please read all instructions carefully and completely before assembly.
2. Assembly by two people is recommended.
Parts included: (Not to scale)
Hardware/Tools included: (Not to scale)
Step 1.
Carefully open the packaging and clear packaging material from assembly area.
Place all components on a protective surface.
Step 2
.
Attach the fourth frame w/lip inside (D) to four pole legs (H), (J), align the holes and insert flat head Allen screws (K) into the
four holes, do not tighten until all four frames are fully assembled. Repeat the same procedures for the rest three frames (C), (B)
& (A). (Fig. 1)
Please note:
a. Pole legs (H) should be at the same side as the top frame with handle;
b
Cross bars on both frame (A) and (B) should be at the same side;
Part Qty. Description
A 1
pc
Top frame
B 1
pc
Second frame with cross bar
C 1
pc
Third frame w/o lip inside
D 1
pc
Fourth frame w/lip inside
E 1
pc
Small glass shelf
F 1
pc
Glass shelf
G 1
pc
Bigger glass shelf
H
2
pcs
Pole leg
(caster w/brake)
J
2
pcs
Pole leg
(Caster w/o brake)
Part Qty.
Description
K
16 pcs
Flat head Allen screw
L 1
pc
Allen wrench
K. Flat head Allen screw L. Allen wrench
A. Top frame B. Second frame with cross bar
C. Third frame w/o lip inside D. Fourth frame w/lip inside
H. Pole leg
(caster w/brake)
E. Small glass shelf F. Glass shelf G. Bigger glass shelf
J. Pole leg
(caster w/o brake)
