Assembly Instructions
© 2017
LCC-106 Single Glider
Step 1
Using (2) 5/16" x 5" bolts, (3) 5/16" x 3 1/2" bolts and
(5) 5/16" nuts, attach legs (C) to chair back and chair
seat (B). DO NOT TIGHTEN NUTS AT THIS TIME. Re-
peat on other side.
Step 2
Assemble the base as shown with (8) 5/16" x 3" lag
bolts and (8) 5/16" washers through holes provided in
base ends (D) and into pilot holes in
cross members (E).
Required Tools:
-Hammer
-Cordless Drill
-#2 Square Drive bit
-1/2" and 9/16" Wrench or
Socket
Hardware:
-(4) 5/16" x 5" Bolts
-(8) 5/16" x 3" Lag Bolts
-(6) 5/16" x 3 1/2" Bolts
-(8) 5/16" Washers
-(10) 5/16" Flange Nuts
-(8) 3/8" x 2 1/2" Bolts
-(8) 3/8" Locknuts
-(16) 3/8" Washers
-(4) Glider Brackets
www.wildridge.com
330-893-4212
A
B
C
E
D
D
C
E
