Debugging and troubleshooting of Media Gateways
Debugging and troubleshooting of Media Gateways
Page 10 of 14
-v -s0 -i any port "5001" or port "6001"
Where:
"5001" (incoming) and "6001" (outgoing) are ports and channels to be specified. For example:
5002, port 1 - channel 2
5003, port 2 - channel 1
5004, port 2 - channel 2
Click
to generate a file
Start
When the file is generated, click Stop
Click on the file to download it
Step 3. Convert a pcap file using Wireshark packet analyzer
To convert a pcap file to a PCM file (*.au format), use Wireshark:
Select UDP packet -> Analyze -> Decode as RTP
After the decoding is completed, go to Telephony -> RTP -> RTP Analysis
Select Save Payload As
Name the file and select a folder to save it
Choose
and
(or
)
Format : .au
Channels : forward
both
Click
to save the file
OK
Note: Pcap trace can be enabled only for one particular channel.
