manualshive.com logo in svg

Wilden Original P8, Инженерия, эксплуатация и обслуживание

Поделиться
Скачать
Wilden Original P8 Скачать руководство пользователя страница 7

WIL-10131-E-01 

  

5 

WILDEN PUMP & ENGINEERING, LLC

Height .................................. 770 mm (30.3")
Width ................................... 490 mm (19.3")
Depth .................................. 333 mm (13.1")
Est. Ship Weight ...... Polypropylene 34 kg (75 lbs)

PVDF 43 kg (95 lbs)

Air Inlet ....................................13 mm (1/2")
Inlet ............................................ 51 mm (2")
Outlet ......................................... 51 mm (2")
Suction Lift ........................... 7.0 m Dry (23')

9.45 m Wet (31')

Displacement per
  Stroke .........................  2.91 l (0.77 gal.)

1

Max. Flow Rate ............... 587 lpm (155 gpm)
Max. Size Solids .....................6.4 mm (1/4")

1

Displacement per stroke was calculated at 4.8 bar 

(70 psig) air inlet pressure against a 2 bar (30 psig) 
head pressure.

Example: 

To pump 291.5 lpm (77 gpm) 

against a discharge pressure head of 2.0 bar 
(30 psig) requires 4.1 bar (60 psig) and 68 
Nm

3

/h (40 scfm ) air consumption. (See dot 

on chart.)

Caution: Do not exceed 8.6 bar (125 psig) air 
supply pressure.

Flow rates indicated on chart were determined by pumping water.

For optimum life and performance, pumps should be specified so that daily operation  parameters 
will fall in the center of the pump performance curve.

S e c t i o n   5 A

P E R F O R M A N C E

P8 PLASTIC

RUBBER-FITTED

  

Height .................................. 770 mm (30.3")
Width ................................... 490 mm (19.3")
Depth .................................. 333 mm (13.1")
Est. Ship Weight ...... Polypropylene 34 kg (75 lbs)

PVDF 43 kg (95 lbs)

Air Inlet ....................................13 mm (1/2")
Inlet ............................................ 51 mm (2")
Outlet ......................................... 51 mm (2")
Suction Lift ......................... 5.18 m Dry (17')

9.45 m Wet (31')

Displacement per
  Stroke .......................... 2.91 l (0.77 gal.)

1

Max. Flow Rate ............... 575 lpm (152 gpm)
Max. Size Solids .....................6.4 mm (1/4")

1

Displacement per stroke was calculated at 4.8 bar 

(70 psig) air inlet pressure against a 2 bar (30 psig) 
head pressure.

Example: 

To pump 283.9 lpm (75 gpm) 

against a discharge pressure head of 2.1 
bar (30 psig) requires 4.1 bar (60 psig) and 
76.5 Nm

3

/h (45 scfm) air consumption. (See 

dot on chart.)

Caution: Do not exceed 8.6 bar (125 psig ) air 
supply pressure. 

Flow rates indicated on chart were determined by pumping water.

For optimum life and performance, pumps should be specified so that daily operation  parameters 
will fall in the center of the pump performance curve.

P8 PLASTIC

TPE-FITTED

  

Содержание Original P8












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды