18
5.5 Turning on the base
unit
The humidifier is only to be turned
on, using the lateral main switch,
when the breathing tube system, the
humidification chamber and the water
reservoir are connected, plugged and
punctured correctly�
NOTE
The AIRcon Gen2 respiratory humidifier
saves the last setting and uses it for a
restart (e�g� after power failure)�
NOTE
After switching on, the warm-up phase
lasts for no more than 30 minutes� After
switching on, the heating and the water
vapor saturation of the respiratory gas
is steadily increased until an optimum
value is reached� Resetting the device
to factory settings is described under
"7�1 Operation in normal mode"�
After switching on, the device first
displays the product model and version
and performs a self-test� During this
initialization, no entries are possible�
NOTE
The version number of the software is
for illustration and may differ from the
actual version�
WILAmed
AIRcon 2
Version 1.3.2
84 h
