12
5. Installation and commissioning
5.1 Connecting components
The power cord is inserted under the machine�
USB port for service
Mains cable
Connect the power cord to an AC outlet
or power strip with the permitted
voltage� The connections for the
heating wire distributor cable for
heating and for the temperature sensor
are mounted laterally on the device�
These connectors are colored and
mechanically coded, being marked with
appropriate symbols�
When using a heated breathing tube
system, the plug of the heating wire
distributor cable is connected with the
yellow connector
)�
The plug of the heated breathing tube
system is similarly color-marked
(green) and mechanically coded�
To use the temperature probe, the plug
of the temperature probe is connected
with the blue connector )�
