WIKA F6137, Руководство по эксплуатации

Страница: 7 / 64

7 Operating instructions, models F6137, F6148, F6160, F6171
ADPR1X914115.01 10/2020 EN/DE
EN
3. Safety
3.2 Intended use
The hydraulic ring force transducers are designed for static and dynamic compression
forces in the field of geotechnology for measuring anchor forces.
Model Nominal size Rated force
F6137 NS 82 0 ... 80 kN to 0 ... 700 kN
F6148 NS 146 0 ... 150 kN to 0 ... 1,500 kN
F6160 NS 383 0 ... 400 kN to 0 ... 3,200 kN
F6171 NS 827 0 ... 800 kN to 0 ... 6,000 kN
Applies to the hydraulic ring force transducer with mounted pressure sensor:
The instrument has been designed and tested in accordance with the relevant safety
regulations for electronic measuring instruments. Any usage outside of this is deemed to
be improper. The perfect functioning and operational safety of the force transducers can
only be guaranteed when complying with the instructions given in the operating instruc-
tions. During its use, the legal and safety regulations (e.g. VDE 0100) required for the
particular application must additionally be observed. This also applies accordingly when
using accessories. Faultless and safe operation of this measuring unit requires proper
transport, professional storage, installation and mounting and careful operation and
corrective maintenance.
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly.
The technical specifications contained in these operating instructions must be
observed. Improper handling or operation of the instrument outside of its technical
specifications requires the instrument to be taken out of service immediately and
inspected by an authorised service engineer.