WIKA F2812, Руководство по эксплуатации

Страница: 12 / 44

12
EN
ADPR1X914112.01 09/2020 EN/DE
WIKA operating instructions, model F2812
5. Commissioning, operation
5. Commissioning, operation
5.1 Precautions before commissioning
■
Tension/compression force transducers are sensitive measuring instruments and
must be handled with appropriate care.
■
Before installing the tension/compression force transducer, check whether the
threaded bores of the mounting position have been executed dimensionally
accurately, thus guaranteeing problem-free mechanical installation of the tension/
compression force transducer.
■
Before installation, make sure that any drilling chips have been removed from the
threaded bores.
5.2 Mounting instructions
CAUTION!
Damage to the instrument through improper installation
■
With the installation of the tension/compression force transducer, the
installation position and the load direction must be considered.
■
Torsional and shear forces must be avoided. Transverse loads and
lateral forces also include the corresponding components of the
measurands that are introduced slanted.
■
Torsional moments, eccentric loads and transverse loads or lateral
forces cause measuring errors and may permanently damage the
tension/compression force transducer.
■
The installation of the tension/compression force transducer must not
be made with any violent force.
■
During installation of the tension/compression force transducer,
the output signal (force value) must always be monitored to avoid
mechanical overload.
■
When subjected to loads in other devices, other than those planned
in the application, a change in the zero signal may result in permanent
damage.
■
If high shear forces or lateral forces are to be expected, the use of
swivel heads is recommended.
■
The device must not touch the deformation element.