WIFO HM 200/1000 Скачать руководство пользователя страница 9

 

 

 

1.4 

Liability 

 

Any person working with or on the machine must have read this manual. The machine is to be used for its intended 
purpose only. Included in the intended purpose are, among other things: 

1.

 

Work  must  be  carried  out  in  accordance  with  the  directions  and  within  the  functional  restrictions  (e.g. 
maximum hydraulic working pressure) as outlined in the regulations. Use only sound and appropriate tools. 

2.

 

Electric/electronic equipment and accessories (e.g. cables) must be treated in accordance with the general 
accepted policy for using non-waterproof portable electric and electronic equipment, such as: 
 

a)

 

Storing and keeping in a clean, dry environment away from rodents and the like; and 

b)

 

Protecting the equipment against severe, uncushioned shocks and water (precipitation). 

 

3.

 

Use only original or compatible spare parts. Such parts must be assembled as directed (e.g. by observing the 
recommended  tightening  moments).  Spare  parts  (as  well  as  lubricants)  are  considered  compatible  only  if 
explicitly  approved  by  WIFO  or  in  the  event  that  the  customer  is  able  to  prove  they  possess  the  required 
properties for the purpose(s) they are used. 

4.

 

Use only lubricants that meet the specifications as described in the directions. 

5.

 

Always observe the local regulations in terms of accident prevention, safety, traffic and transport. 

6.

 

Only  trained  personnel  with  knowledge  of  the  possible  hazards  have  permission  to  work  with/on  the 
machine. 

7.

 

WIFO-Anema  B.V.  will  assume  no  liability  in  any  shape  or  form  for  losses  or  damage  caused  following 
modifications to the machine, which have not been explicitly approved by WIFO. 

 
 

 

 

 

 

 

 

1.5 

Warranty 

 

WIFO-Anema  B.V.  guarantees  the  soundness  of  its  products  in  terms  of  materials  used  and/or  structural  defects. 
However, in any event this warranty is limited to the free-of-charge replacement or repairs of the defect product, or 
part thereof. WIFO-Anema B.V. assumes no liability for any loss or damage arising from faulty deliveries and/or the 
breakdown  of  purchased  goods  before  the  warranty  period  has  expired. 

The  warranty  period  for  this  product  is 

twelve months.

 

 

 

Noncompliance with the rules and directions from this manual will be considered as serious negligence, for 
the consequences of which WIFO-Anema B.V. accepts no liability whatsoever. In such cases, the user will 
bear the full risk of his actions! 

 

WIFO-Anema B.V. is continuously working on the improvement of its products. For that reason, WIFO-
Anema B.V. reserves the right to introduce any changes and improvements deemed necessary without 
prior notice. However, it does not imply an obligation to make any such changes or improvements to 
machines bought by customers in the past! 
 

 

 

Содержание HM 200/1000

























Отзывы: