Wieland wienet v3, Руководство пользователя

Страница: 79 / 95

Customization
Wieland Electric GmbH | BA001039 (Rev. A) | 08/2016
80
6 Customization
6.1 User Modules
Configuration of user modules can be accessed by selecting the
User Modules
item. It is possible to add
new modules, delete them or switch to their configuration. Use the
Brows e
button to select the user
module (compiled module has tgz extension). The module is added using the
Add
button.
Added module appears in the list of modules on the same page. If the module contains index.html or in-
dex.cgi page, module name serves as a link to this page. The module can be deleted using the
Delete
button.
Updating of the module can be done in the same way like adding a new module. Module with a higher
(newer) version will replace the existing module. The current module configuration is kept in same state.
Programming and compiling of modules are described in the programming guide.
Added user module
There are for example these user’s modules available. User modules can be downloaded from
www.wieland-electric.com or can be custom-programmed.
Module name Description
MODBUS TCP2RTU Provides a conversion of MODBUS TCP/IP protocol to MDBUS RTU protocol,
which can be operated on the serial line.
Easy VPN client Provides secure connection of LAN network behind our router with LAN net-
work behind CISCO router.
NMAP Allows to do TCP and UDP scan.
Daily Reboot Allows to perform daily reboot of the router at the specified time.
HTTP Authentication Adds the process of authentication to a server that doesn’t provide this service.
BGP, RIP, OSPF
Add support of dynamic protocols.
PIM SM Adds support of multicast routing protocol PIM-SM.
WMBUS Concentrator Allows to receive messages from WMBUS meters and saves contents of these
messages to XML file.
pduSMS Sends short messages (SMS) to specified number.
GPS Allows router to provide location and time information in all weather, anywhere
on or near the Earth, where there is an unobstructed line of sight to four or
more GPS satellites.
Pinger Allows to manually or automatically verify the functionallity of the connection
between two network interfaces (ping).
IS-IS Add support of IS-IS protocol.
User modules