Wieland wienet v3, Руководство пользователя

Страница: 59 / 95

Contents of Package
Wieland Electric GmbH | BA001039 (Rev. A) | 08/2016
60
5.15 DynDNS Client Configuration
With the DynDNS service you can access the router remotely using an easy to remember custom host-
name. This client monitors the router’s IP address and update it whenever it changes. To make DynDNS
work it is necessary to have a public IP address (static or dynamic) and an active account at
www.dyndns.org (Remote Access service).
DynDNS client Configuration is accessible in the
DynDNS
item in the menu. There has to be registered
custom domain (third-level) and account information defined in the configuration form.
Item Description
Hostname Third order domain registered on server www.dyndns.org
Username Username for login to DynDNS server
Password Password for login to DynDNS server
Server If you want to use another DynDNS service than www.dyndns.org, then
enter the update server service to this item. If this item is left blank, it
uses the default server members.dyndns.org
DynDNS configuration
Example of the DynDNS client configuration with domain wieland.dyndns.org:
Example of DynDNS configuration
Note!
To access the router’s configuration remotely it is neccessary to enable this in the NAT config-
uration (bottom part of the form), see chapter 4.9.
5.16 NTP Client Configuration
NTP client Configuration can be called up by option NTP item in the menu.
NTP
(Network Time Protocol)
allows set the exact time to the router from the servers, which provide the exact time on the network.
By parameter
Enable local NTP
service router is set to a mode in which it operates as an NTP server for
other devices in the LAN behind the router.
By parameter
Enable local NTP service it is possible to set the router in mode, that it can serve as NTP
server for other devices.
Item Description
Primary NTP Server Ad-
dress IP or domain address primary NTP server.
Secondary NTP Server Ad-
dress IP or domain address secondary NTP server.
Timezone By this parameter it is possible to set the time zone of the router
Daylight Saving Time Using this parameter can be defined time shift:
•
No – time shift is disabled
•
Yes – time shift is allowed
NOTE