Wieland wienet v3, Руководство пользователя

Страница: 37 / 95

Contents of Package
Wieland Electric GmbH | BA001039 (Rev. A) | 08/2016
38
5.6 WLAN Configuration
Attention!
This item is available only if the router is equipped with a WiFi module.
The form for configuration of WiFi network and DHCP server functioning on this network can be invoked by
pressing the
WLAN
item in the main menu of the router web interface.
Enable WLAN
interface check box at
the top of this form is used to activate WIFi LAN interface. It is also possible to set the following properties:
Item Description
Operating Mode WiFi operating mode:
•
access point (AP) – router becomes an access point to which other devices in
station (STA) mode can be connected
•
station (STA) – router becomes a client station, it means that receives data pack-
ets from the available access point (AP) and sends data from cable connection via
wifi network
DHCP Client Activates/deactivates DHCP client
IP Address Fixed set IP address of WiFi network interface
Subnet Mask Subnet mask of WiFi network interface
Bridged Activates bridge mode
•
no – Bridged mode is not allowed (it’s default value). WLAN network is not con-
nected with LAN network of the router.
•
yes – Bridged mode is allowed. WLAN network is connected with one or more
LAN network of the router. In this case, the setting of most items in this table is
ignored. Instead, it takes setting of selected network interface (LAN).
Default Gateway IP address of default gateway. When entering IP address of default gateway, all packets
for which the record was not found in the routing table are sent to this address.
DNS Server Address to which all DNS queries are forwarded
Use
Enable dynamic DHCP
leases item at the bottom of this form to enable dynamic allocation of IP ad-
dresses using DHCP server. It is also possible to specify these values:
Item Description
IP Pool Start Beginning of the range of IP addresses which will be assigned to DHCP clients
IP Pool End End of the range of IP addresses which will be assigned to DHCP clients
Lease Time Time in seconds for which the client may use the IP address
Configuration of DHCP server
All changes in settings will apply after pressing the
Apply
button.
ATTENTION