Wieland wienet v3, Руководство пользователя

Страница: 34 / 95

Contents of Package
35
Wieland Electric GmbH | BA001039 (Rev. A) | 08/2016
5.5 WiFi Configuration
Attention!
This item is available only if the router is equipped with a WiFi module.
The form for configuration of WiFi network can be invoked by pressing the
WiFi
item in the main menu
of the router web interface.
Enable WiFi
check box at the top of this form is used to activate WiFi. It is
also possible to set the following properties:
Item Description
Operating mode WiFi operating mode:
•
access point (AP) – router becomes an access point to which other de-
vices in station
(STA)
mode can be connected
•
station (STA) – router becomes a client station, it means that receives
data packets from the available access point (AP) and sends data from ca-
ble connection via wifi network
SSID Unique identifier of WiFi network
Broadcast SSID Method of broadcasting the unique identifier of SSID network in beacon
frame and type of response to a request for sending the beacon frame.
•
Enabled – SSID is broadcasted in beacon frame
•
Zero length – Beacon frame does not include SSID. Requests for sending
beacon frame are ignored.
•
Clear – Each SSID character in beacon frame is replaced by 0. However,
original length is kept. Requests for sending beacon frame are ignored.
Probe Hidden SSID Probes hidden SSID (only for station (STA) mode)
Country Code Code of the country, where the router is used with WiFi. This code must be
entered in format ISO 3166-1 alpha-2. If country code isn’t specified and the
router has implemented no system to determine this code, it is used "US" as
default
country
code.
If no
country
code is specified or is entered the wrong country code, then it
may come a pass a breach of regulatory rules for the using of frequency
bands in the particular country.
HW Mode HW mode of WiFi standard the access point (AP) will support.
•
IEE 802.11b
•
IEE 802.11b+g
•
IEE 802.11b+g+n
•
IEE 802.11a
•
IEE 802.11a+n
Channel Channel where the WiFi AP is transmitting. Channels 12, 13 and 14 can be
selected only in countries where they are allowed on the basis of country
code.
BW 40 MHz Option for HW mode 802.11n that allows using of two standard 20MHz
channels simultaneously. Option is available in the STA mode also and it has
to be enabled in both – the AP and STA mode if using the high throughput
mode.
WMM Enables basic QoS for WiFi networks. This version doesn’t guarantee net-
work throughput. It is suitable for simple applications requiring QoS.
Authentication Provides access control of authorized users in WiFi network:
•
Open – authentication is not required (free access point)
•
Shared – base authentication using WEP key
•
WPA-PSK – authentication using better authentication method PSK-PSK
•
WPA2-PSK – authentication using AES encryption
ATTENTION