Wieland wienet v3, Руководство пользователя

Страница: 28 / 95

Contents of Package
29
Wieland Electric GmbH | BA001039 (Rev. A) | 08/2016
Attention!
•
If only one SIM card is plugged in the router (router has one slot for a SIM card),
router switches between the APN. Router with two SIM cards switches between SIM
cards.
•
Correct PIN must be filled. For SIM cards with two APN’s there will be the same PIN
for both APN‘s. Otherwise the SIM card can be blocked by false SIM PIN.
Items marked with an asterisk must be filled in only if this information is required by the
operator (carrier).
In case of unsuccessful establishing a connection to mobile network is recommended to
check the accuracy of entered data. Alternatively, try a different authentication method
or network type.
5.3.2 DNS Address Configuration
The
DNS
Settings item is designed for easier configuration on the client side. When this item is set to the
value get from opertor router makes an attempt to automatically get an IP address of the primary and
secondary DNS server from the operator. By way of contrast, set manually option allows you to set IP
addresses of Primary DNS servers manually (using the
DNS Server item).
5.3.3 Check Connection to Mobile Network Configuration
If the
Check Connection
item is set to
enabled or e bind
, checking the connection to mobile net-
work is activated. Router will automatically send ping requests to the specified domain or IP address
(
Ping IP Address
item) in regular time interval (
Ping Interval
). In case of unsuccessful ping, a new one will
be sent after ten seconds. If it fails to ping the IP address of three times in a row, the router terminates
the current connection and tries to establish new ones. Checking can be set separately for two SIM cards
or two APNs. As a ping address can be used an IP address for which it is certain that it is still functional
and is possible to send ICMP ping (e.g. DNS server of operator).
In the case of the
enabled
option ping requests are sent on the basis of routing table. Thus, the requests
may be sent through any available interface. If you require each ping request to be sent through the net-
work interface, which was created on the occasion of establishing a connection to the mobile operator, it
is necessary to set the
Check Connection item to e bind
. The disabled variant deactivates check-
ing the connection to mobile network.
Item Description
Ping IP Address Destinations IP address or domain name of ping queries.
Ping Interval Time intervals between the outgoing pings.
Check connection to mobile network configuration
If the
Enable Traffic Monitoring
option is selected, then the router stops sending ping questions to the
Ping IP Address and it will watch traffic in connection to mobile network. If this connection is without
traffic longer than the Ping Interval, then the router sends ping questions to the Ping IP Address.
Attention!
The enabling of Check connection to mobile network is necessary for uninterrupted and
lasting operation of the router
.
ATTENTION
ATTENTION