Wieland wienet v3, Руководство пользователя

Страница: 18 / 95

Status
19
Wieland Electric GmbH | BA001039 (Rev. A) | 08/2016
4.8 DynDNS status
The result of DynDNS record update (from the server www.dyndns.org) can be invoked pressing the
DynDNS item in the Status menu.
Following messages are possible when detecting the status of DynDNS record update:
•
DynDNS client is disabled.
•
Invalid username or password.
•
Specified hostname doesn’t exist.
•
Invalid hostname format.
•
Hostname exists, but not under specified username.
•
No update performed yet.
•
DynDNS record is already up to date.
•
DynDNS record successfully update.
•
DNS error encountered.
•
DynDNS server failure.
Attention!
For correct function of DynDNS, SIM card of router must have public IP address as-
signed.
4.9 System Log
In case of any connection problems it is possible to view the system log by pressing the
System Log
menu item. Detailed reports from individual applications running in the router are displayed. Use the
Save
Log button to save the system log to a connected computer (the text file with the .log extension will be
saved). The second button –
Save Report
– is used for creating detailed report (generates all information
needed by support in one text file in the .txt format – statistical data, routing and process tables, system
log, configuration).
The default length of the system log is 1000 lines. After reaching 1000 lines the new file is created for
storing the system log. After completion of 1000 lines in the second file, the first file is overwritten with
the new one.
Output of the system log is done by the
Syslogd
program. It can be started with two options to modify its
behavior. Option "- S " followed by decimal number sets the maximal number of lines in one log file. Op-
tion "- R " followed by hostname or IP address enables logging to a remote syslog daemon. (If the remote
syslog deamon is Linux OS, there has to be remote logging enabled (typically running " syslogd -R "). If it’s
the Windows OS, there has to be syslog server installed, e.g. Syslog Watcher ). To start syslogd with
these options, the "/etc/init.d/syslog" script can be modified via SSH or lines can be added into
Startup
Script
(accessible in
Configuration section
) according to figure.
ATTENTION