Wieland wienet router v2, Руководство пользователя

Страница: 26 / 50

RS232
26 Wieland Electric GmbH | BA000917 | 01/2019 (Rev. B)
7 RS232
7.1 RS232 description
The expansion port RS232 is created as expansion port which enables to use of the next
hardware interface of Wieland routers for next signal processing. This interface is physi-
cally connected to the RJ45 connector on the appropriate router. The expansion port
RS232 is internal supplies from appropriate router. Against bus overload the expansion
port RS232 is protect.
Expansion port RS232 is possible fitted into PORT1 and PORT2.
7.2 Expansion port connection
Panel socket RJ45 (RS232 – DCE - Data Communication Equipment)
Pin
no. Signal mark Description Direction
1 RTS Request To Send Input
2 CTS Clear To Send Output
3 DTR Data Terminal Ready Input
4 DSR Data Set Ready: Connect to +3 V trought R 330 Ohm Output
5 GND Signal ground
6 RXD Receive data Output
7 CD Carrier Detect Output
8 TXD Transmit Data Input
Example of the meter connection to router:
NOTICE
Table 14: Connection
of RS232 connector
Figure 12: RS232 port
connector
Figure 13: Meter con-
nection to router