Wieland Wienet FS 16-EI-W Скачать руководство пользователя страница 87

Страница: 87 / 108

5 Managing Switch

Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018

5.10.2.2

Port Settings

The Port Settings page allows you to define a trust state (enabled or disabled) to a listed port.

To access this page, click QoS > QoS Basic Mode > Port Settings.

Figure 5.68 QoS > QoS Basic Mode > Port Settings

The following table describes the items in the previous figure.

Item

Description

Port

Enter the port number for the QoS basic mode setting.

Trust State

Select Enabled or Disabled to set the port's trust state status.

Apply

Click Apply to save the values and update the screen.

The ensuing table for QoS Port Status settings are informational only: Port and Trust State.

5.10.3

Rate Limit

Rate Limits features control on a per port basis. Bandwidth control is supported for the following: Ingress
Bandwidth Control, Egress Bandwidth Control and Egress Queue.

5.10.3.1

Ingress Bandwidth Control

The Ingress Bandwidth Control page allows you to configure the bandwidth control for a listed port.

To access this page, click QoS > Rate Limit > Ingress Bandwidth Control.

Figure 5.69 QoS > Rate Limit > Ingress Bandwidth Control

The following table describes the items in the previous figure.

Item

Description

Port

Enter the port number for the rate limit setup.

State

Select Disabled or Enabled to set the port's state status.

Rate (Kbps)

Enter the value in Kbps (16 to 1000000) to set the bandwidth rate for the selected port.

Apply

Click Apply to save the values and update the screen.

The ensuing table for Ingress Bandwidth Control Status settings are informational only: Port and Ingress
Rate Limit (Kbps).

Содержание Wienet FS 16-EI-W













































































































Результаты поиска

Содержание Wienet FS 16-EI-W

Отзывы:

Похожие инструкции для Wienet FS 16-EI-W

Бренды по названию

Популярные бренды

Wieland Wienet FS 16-EI-W, Руководство пользователя

Результаты поиска

Содержание Wienet FS 16-EI-W

Отзывы:

Похожие инструкции для Wienet FS 16-EI-W

Бренды по названию

Популярные бренды