5 Managing Switch
64
Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018
Item
Description
Migrate
Click the check box to enable the migrate function.
Forces the port to use the new MST/RST BPDUs, requiring the Switch to test on
the LAN segment. For the presence of legacy devices, which are not able to un-
derstand the new BPDU formats.
Apply
Click Apply to save the values and update the screen.
The ensuing table for STP Port Status settings are informational only: Port, Admin Enable, Path Cost, Edge
Port and P2P MAC.
5.7.9.3
STP Bridge Settings
The STP Bridge Settings page allows you to configure the priority, forward delay, maximum age, Tx hold
count, and the hello time for the bridge.
To access this page, click L2 Switching > Spanning Tree > STP Bridge Settings.
Figure 5.38 L2 Switching > Spanning Tree > STP Bridge Settings
The following table describes the items in the previous figure.
Item
Description
Priority
Click the drop-down menu to select the STP bridge priority.
Forward Delay
Enter the variable (4 to 30) to set the forward delay for STP bridge settings.
Max Age
Enter the variable (6 to 40) to set the Max age for STP bridge settings.
Tx Hold Count
Enter the variable (1 to 10) to designate the TX hold count for STP bridge settings.
Hello Time
Enter the variable (1 to 10) to designate the Hello Time for STP bridge settings.
Apply
Click Apply to save the values and update the screen.
The ensuing table for STP Bridge Information settings are informational only: Priority, Forward Delay,
Max Age, Tx Hold Count and Hello Time.
The ensuing table for STP Bridge Status settings are informational only: Bridge Identifier, Designated Root
Bridge, Root Path Cost, Designated Bridge, Root Port and Last Topology Change.
