Wieland Wienet FS 16-EI-W Скачать руководство пользователя страница 63

Страница: 63 / 108

5 Managing Switch

Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018

Item

Description

Force Version

Click the drop-down menu to select the operating mode for STP.



STP-Compatible: 802.1D STP operation.



RSTP-Operation: 802.1w operation.



MSTP-Operation: 802.1s operation.

Apply

Click Apply to save the values and update the screen.

The ensuing table for STP Information settings are informational only: STP, BPDU Forward, PathCost
Method and Force Version.

5.7.9.2

STP Port Settings

The STP Port Settings page allows you to configure the ports for the setting, port's contribution, configure
edge port, and set the status of the BPDU filter.

To access this page, click L2 Switching > Spanning Tree > STP Port Settings.

Figure 5.37 L2 Switching > Spanning Tree > STP Port Settings

The following table describes the items in the previous figure.

Item

Description

Port Select

Select the port list to specify the ports that apply to this setting.

Admin Enable

Select Enabled or Disabled to setup the admin profile for the STP port.

Path Cost (0 = Auto) Select short or long to define the method of used for path cost calculations.

Edge Port

Click the drop-down menu to set the edge port configuration.



No: Force to false state (as link to a bridge).



Yes: Force to true state (as link to a host).

P2P MAC

Click the drop-down menu to set the Point-to-Point port configuration.



No: Force to false state.



Yes: Force to true state.

Содержание Wienet FS 16-EI-W













































































































Результаты поиска

Содержание Wienet FS 16-EI-W

Отзывы:

Похожие инструкции для Wienet FS 16-EI-W

Бренды по названию

Популярные бренды

Wieland Wienet FS 16-EI-W, Руководство пользователя

Результаты поиска

Содержание Wienet FS 16-EI-W

Отзывы:

Похожие инструкции для Wienet FS 16-EI-W

Бренды по названию

Популярные бренды