Wieland R1.180.0010.0, Оригинальное руководство пользователя

Страница: 10 / 36

10
Error Codes of Error LED (FLT)
Blink code Cause of error

static Secondary error on modules that have not discovered the error themselves

2x Error in module configurations on S1, S2, S3, other module configuration

3x Rotary switch altered during operation

4x Module location list comparison when power switched on has detected a difference (including alteration of rotary switch position
before or during power off)

5x Voltage supply internal and external

6x Self-monitoring, internal error, etc. (e.g. enter button pressed longer than 3 s)
Technical Data
Power circuitry (A1, A2) Min. Typ. Max.
Operating voltage U
B
, DC DC 19.2 V DC 24 V DC 30 V
Rated voltage U
N
-- DC 24 V --
Residual ripple Uss -- -- 3.0 V
Rated power DC -- -- 1.8 W
Peak current I
P
-- -- 25 A
Ready time t
on
(after connecting U
B
) -- -- 10 s
Class gG fuse or circuit-breaker 6 A with tripping characteristic B or C
Input circuit (I1 – I4, EN, S1 – S3) Min. Typ. Max.
U
e
(HIGH 13.0 V -- 30 V Input voltage
U
e
(LOW) -5.0 V -- 5.0 V
I
e
(HIGH) 2.4 mA 3.0 mA 3,8 mA Input current
I
e
(LOW) -2.5 mA -- 2,1 mA
ON period t
E
70 ms -- --
OFF period t
A
> operate time t
AN
Break time of U
E
(test pulse) -- -- 1.0 ms
Synchronous time t
S
(Function 1, 2) -- -- 1500 ms
Synchronous time t
S
(Function 4, 5.2) -- -- 500 ms
Synchronous change time t
SW
(only with FUNCTION 4) 94 ms -- 100 ms
Output circuit (X1, X2) Min. Typ. Max.
Output voltage 18.0 V -- 30.0 V
Output current -- -- 150 mA
Function 3.1, 7, 8 -- no test pulses --
Function 3.2 (BWS type 2) -- 12 ms --
Function 3.2 (PDF sensors) -- 52 ms --
Test pulse width t
TI
Function 1, 2, 4, 5, 6, 9 -- 12 ms --
Function 3.1, 7, 8 -- no test pulses --
Function 3.2 (BWS type 2) -- 20 ms --
Function 3.2 (PDF sensors) -- 70 ms --
Test duration t
TD
Function 1, 2, 4, 5, 6, 9 -- 20 ms --
Function 3.1, 7, 8 -- no test pulses --
Function 3.2 (BWS type 2) -- 40 ms --
Function 3.2 (PDF sensors) -- 384 ms --
Test pulse period T
TP
Function 1, 2, 4, 5, 6, 9 -- 40 ms --
Load capacitance C
L
-- -- 500 nF
Line length (simple,

1,5mm
2
) -- -- 100 m
Short-circuit behaviour absolutely short-circuit-proof
Output circuit (Q1, Q2, Q3, Q4) Min. Typ. Max.
Output voltage 18.0 V -- 30 V
Output current (at U
N
) -- -- 2.0 A
Total current (see diagram ‘Total current vs. temperature’) -- -- 4.0 A
Test pulse width t
TI, HL
-- 500

s --
Test pulse period T
PI, HL
32 ms -- 80 ms
Load capacitance C
L
-- -- 500 nF
Inductive switching off energy E (E = 0.5 * L * I
2
) -- -- 370 mJ
Line length (simple,

1,5mm
2
) -- -- 100 m
*Operate time t
AN
Function 3.1, 7, 8, 9 -- -- 13 ms
Function 1 (except safety mat), 2, 4, 5.1, 6,9 -- -- 20 ms
Function 1 (safety mat) -- -- 38 ms
Function 5.2 -- -- 29 ms
Function 3.2 (BWS type 2) -- -- 32 ms
Function 3.2 (PDF sensors) -- -- 79 ms
OR off to Qx off -- -- 9 ms
Function 3 (MUTING off to Qx off) -- -- 65 ms
EN off to Qx off -- -- 13 ms
0 / 0,5 / 1 /1,5 / 2 / 2,5 / 3 / 3,5 / 4 / 5 s
0 / 5 / 10 / 15 / 20 / 25 / 30 / 35 / 40 / 50 s
Settable release delay t
RV
Q3/4 or Q4
(depending on device version)
0 / 0.5 / 1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 5 min
Short-circuit behaviour absolutely short-circuit-proof