3
podis CON flat cable
Wieland Electric GmbH | BA000369 (Rev. B) | 02/2016
13
3.4
Stripping of flat cables
The
podis
®
CON
flat cable has to be stripped for some applications. Required for this purpose:
•
Assembly of flat cable end caps (Z5.562.7553.1)
•
Connection to distributor module (75.010.0053.1)
Required tools:
Figure: Stripping pliers (95.350.0300.0)
Figure: Stripping knife (95.350.0700.0)
Procedure:
1.
Cut the cable to the desired length.
2.
Strip the flat cable in accordance with the following table.
Stripping lengths (X mm)
Cable end cap
19 mm
Distributor module
50 mm
Terminal block inside switchgear
cabinet
> 50 mm (depending on specific connecting conditions)
