Wiedenmann Terra Float Air Скачать руководство пользователя

Страница: 66 / 107

All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of publication.

We reserve the right to make design changes at any time without prior notification.

7.0. Operation

7.5. Operating the precise overseeding unit

7.5.5.11. Error memory

1. Select "Error memory" menu point.

The list of errors will be displayed.

2. Turn the turn-and-push button.

The error messages will be displayed in sequence.

3. Press the ESC key.

The main menu will be displayed.

7.5.5.12. Language

1. Select "Language" menu point.

The languages will be displayed.

2. Select a language by turning the turn-and-push but-

ton.

3. Save your selection by pressing the turn-and-push

button.

The entry will be confirmed.

The main menu will be displayed.

Esc

Содержание Terra Float Air












































































































Результаты поиска

Содержание Terra Float Air

Отзывы:

Похожие инструкции для Terra Float Air

Бренды по названию

Популярные бренды

Wiedenmann Terra Float Air, Руководство по эксплуатации

Результаты поиска

Содержание Terra Float Air

Отзывы:

Похожие инструкции для Terra Float Air

Бренды по названию

Популярные бренды