All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of publication.
We reserve the right to make design changes at any time without prior notification.
52
7.0. Operation
7.5. Operating the precise overseeding unit
7.5.5. General setting possibilities and displays
The control element can be used to make the following settings:
•
Quantity adaptation (only possible in automatic mode)
•
Hectare counter (only possible in automatic mode)
•
Service query
•
Calibration test
•
Operating mode
•
Calibration run
•
Speed pulse
•
EHR signal
•
Working width
•
Residual discharge
•
Error memory
•
Language
•
Units
•
Blower
Select main menu:
1. Turn the turn-and-push button.
2. Select the "Main menu" symbol.
3. Push the turn-and-push button.
The main menu will be displayed.
Select a menu point:
1. Select main menu.
2. Turn the turn-and-push button.
Push the turn-and-push button. The
menu point will be displayed
