Snow Master Vario Flex 3370
8 Before Initial Operation
46
3370 99 01 – 003
02 | 2019
8.3.5.
"Garage access" special function
In order to ensure that entrances and junctions are cleared, you
can use the "Garage access" special function as described
below:
Approach the entrance in the 180° inclined position.
Press and hold the selection button (1) and then
press either of the appropriate buttons (2) or (3).
The Vario Flex moves to the V position.
This means that the half of the shield you wish to move can be
swung forwards into the V position and then back again.
Ending the "Garage access" special function
Press the selection button (1) again.
The "Garage access" special function is ended and the
control system switches back to the previous function.
8.3.6.
Meaning of the left and right warning LEDs
Left LED (2)
Lights up
green
Shield is at 90° to the direction of travel (in
180°mode).
Lights up
red
Left inner shield is in collision zone or
sensor has malfunctioned
(See section 12 „Troubleshooting“)
Flashes
red
Left inner and outer shields are in collision
zone, shield function is disabled: See
Section 8.3.7 "Unlock button function“.
Right LED (3)
Lights up
green
Shield is at 90° to the direction of travel (in
180°mode).
Lights up
red
Right inner shield is in collision zone or
sensor has malfunctioned
(See section 12 „Troubleshooting“)
Flashes
red
Right inner and outer shields are in collision
zone, shield function is disabled: See
Section 8.3.7 "Unlock button function“.
