Snow Master Vario Flex 3370
5 Assembly
02 | 2019
3370 99 01 – 003
33
5.5.
Electric connection
5.5.1
Electric connection to battery
ATTENTION!
Incorrect electrical connection!
Only appropriately qualified professionals
may carry out the connection work!
Mount 3-pin socket (A) at a suitable location in the area of
the driver's seat.
Install cable (B) from the battery to 3-pin socket (A).
Insert flat connector (C) of line 1 in socket (A) at
position (D).
Insert flat connector (E) of line 2 in socket (A) at
position (F).
Insert flat connector (G) of green/yellow line in socket (A)
at position (H).
Connect ring shoe of lines 1 and 2 to positive terminal of
battery.
Connect ring shoe of green/yellow line to negative terminal
of battery.
The lines are fused as follows:
Line 1 with 25 A (K)
Line 2 with 10 A (L)
5.5.2
Connecting the control unit
The control unit has a 4-pin connection on its rear side to which
the connection cable (A) must be connected.
The control panel must be in a suitable bracket during operation.
A suction cup holder is included with the machine. It must be
attached to a smooth and clean glass surface. A screw-on
adapter plate (B) is included for mounting at other positions.
