Snow Master Vario Flex 3370
3 Safety notes
02 | 2019
3370 99 01 – 003
13
3.5.
Service life of the device
The useful life of this device depends on correct operation and maintenance, as well as the deployment and operating
conditions.
Continuous operational readiness and a long useful life of the machine can be achieved by following the instructions
and notes in these operating instructions.
Once the season is over, the machine should be checked thoroughly for wear and any other damage.
Damaged and worn components should be replaced before using the device again.
3.6.
General safety instructions
Observe the generally applicable safety and accident prevention regulations as well as the notes in these operating
instructions!
Familiarize yourself with all equipment and operating elements and their functions before starting work. Ensure that all
protective equipment has been properly installed.
In the working area, the user is responsible for the safety of other persons.
Observe the applicable regulations when using public roads!
Check the immediate surroundings before driving (children!)!
Keep all persons clear of the danger zone of the device!
Only use the attachment components designated for use with the attached equipment.
Observe permitted axle loads and axle load distribution. The tractor's ability to steer and brake must be maintained.
The driving and operating properties of the tractor may be influenced by the attachment of the device! Always adapt
your driving style to match the terrain and ground conditions. Special care should be taken when working and turning
on a slope.
Switch the machine and the motor of the tractor off and remove the ignition key before carrying out maintenance.
All safety devices must be assembled before initial operation of the device.
Always keep the device in a good condition. Improper changes to the machine impair its function, operational reliability
and service life
3.6.1.
Personnel qualification of the operating personnel
Improper handling can lead to serious personal injuries or even death. To prevent accidents, all persons working with the
machine must meet the following minimum requirements:
They must be physically capable of controlling the machine.
They must be able to perform the work with the device described in these operating instructions safely.
They must understand how the machine works within the scope of their duties and be able to both recognise and
avoid the hazards/dangers.
They must have read and understood the operating instructions.
They must be familiar with operating vehicles.
When driving the device on roads, they must have sufficient knowledge of the rules of road traffic and possess the
stipulated driving licence.
