Flex Cut RMR 230 H
6 Attaching to a tractor
05 | 2021
846 99 01
–
003
33
6.2
Attachment with three-point frame
The three-point frame is equipped with connection components
for categories I and II as standard.
Category I:
➢
Attach the lower guide bars by inserting the pin (
1
)
into the three-point frame and securing it.
Category II:
➢
Attach the lower guide bars by inserting the pin (
2
)
into the three-point frame and securing it.
Upper guide bar:
➢
Attach the upper guide bar by inserting the pin (
3
) into
the correct hole in the three-point frame and securing
it.
➢
Attach the cardan shaft.
➢
Raise the lawn mower using the front hydraulics.
6.3
Adjusting the PTO-shaft
To be able to adapt the cardan shaft, the attachment must be
fitted to the carrier vehicle.
➢
Pull the halves of the cardan shaft (
1
) and (
2
) apart.
➢
Fit the tractor-side half of the cardan shaft (
1
) to the
cardan shaft connection (
2
) of the carrier vehicle.
